Quick Answer: What Is Abrasive Wheel Training?

What does abrasive wheel training cover?

The course covers different types of abrasive wheel, diamond blades, pre-use inspection to wheels and tools, hazards, correct PPE, fire control, regulations, correct cutting/grinding techniques and correct selection of wheels.


Under the ‘Use of Work Equipment Regulations 1998’ and the ‘Abrasive Wheels Regulations 1970’ those who operate Abrasive Wheels must have sufficient training. … This training must certify competence and not just attendance.

What should you do before mounting an abrasive wheel?

The wheels must fit freely on the spindle. Test wheel and machine by running it at operating speed in a protected area at least one minute before grinding. Wear all necessary personal protective equipment such as eye, face, hearing and respiratory protection, gloves, arm guards, and safety shoes.

Can abrasive wheels rotate in both directions?

Re: What direction of grinder rotation Usually the wet grinders can be used backwards because they also have a leather honing wheel, which must be used running away from the edge. You can use the solid wheels, (stone, diamond, cbn etc.) in either direction.

How long is abrasive wheels training valid for?

3 yearsOne of the most frequent questions we get asked is ‘How long does the Abrasive Wheels certificate last? ‘ The certification is valid for 3 years from the date of the successful completion of the training.

What are abrasive wheels used for?

They are used for surface modification or preparations (external or internal) by periphery grinding, abrasive cut-off and face grinding standard designs; they (disc) can also be used for cutting materials. Some are used for polishing, deburring, sanding and finishing.

Do you need abrasive wheel training to use a grinder?

Suitable training is a MUST. … Users of handheld grinders will require suitable information; instruction and training in the safe selection and use of abrasive wheels.

Why is it dangerous to run an abrasive wheel faster?

While a wheel that is run far enough in excess of its rated maximum speed may shatter within minutes of operation, danger may also result from a wheel run just slightly faster than its rated speed. … The major injury risk in the use of grinding wheels is that the wheel may burst during grinding.

What test should be performed on abrasive wheels?

What is an Abrasive Wheel ring test? Grinding wheels must be inspected and “ring-tested” before they are mounted to ensure that they are free from cracks or other defects. Wheels are tapped gently with a light, nonmetallic instrument. A stable and undamaged wheel will give a clear metallic tone or “ring.”

What type of abrasive wheel is used for grinding cemented carbides?

Silicon Carbide Harder than standard aluminium oxide with a very sharp abrasive grain. It is a versatile material, recommended for grinding relatively soft metals such as aluminium or cast iron but can also be used on extremely hard materials such as cemented carbide.

What is the main cause of abrasive wheel breakage?

Bad storage, incorrect selection of a wheel, improper mounting, excessive out-of-balance conditions, excessive speed, grinding machine defects, and malpractices in the grinding operations are all factors that can result in breakage.

How a grinding wheel is selected?

The abrasive aggregate is selected according to the hardness of the material being cut. Grinding wheels with diamond or CBN grains are called superabrasives. Grinding wheels with aluminum oxide (corundum), silicon carbide, or ceramic grains are called conventional abrasives.

What type of abrasive wheel is used for grinding die steel?

Abrasive grinding wheel materials Aluminum oxide grains are best suited for grinding steel and similar high tensile strength materials. Silicon carbide grains are classified as regular or sharp. This type of grain is best suited for grinding cast iron, nonferrous and similar low tensile strength materials.

Are angle grinders safe?

The most serious injuries from angle grinders are lacerations from kickbacks and lacerations from attachments (such as grinding discs and wheels) that break or shatter to become projectiles. … However if the use of an angle grinder can’t be avoided, ensure you use it safely.

What is the main safety risk associated with abrasive wheels?

When in use, abrasive wheels can create sparks. This has the potential to lead to fires or even explosions if their surroundings aren’t keep clean and ventilated. In order to protect against this, it is the duty of both the employer and those using the wheels to ensure clean, well-ventilated working environment.