Question: Why Would The White WIRE Be Hot?

Why are both black and white wires hot?

like the title says both wires (black and white get or turn hot).

To answer your question, Yes, that is correct.

The reason you are getting 120 volts when the fan/light is on is because the voltage is feeding trough the motor or the light bulb (or both)..

What does it mean when hot and neutral wires are reversed?

If your outlet’s polarity is reversed, it means that the neutral wire is connected to where the hot wire is supposed to be. … There is always electricity flowing out of an outlet with reversed polarity, even if an appliance is supposed to be off.

Why would an outlet have 2 hot wires?

The reason for multiple hot/neutral wires for one outlet is that the outlets are daisy-chained together. This means hot/neutral is only coming from one of the wires and it is being sent to the other wire.

What happens if you connect a black wire to a white wire?

No, the neutral and ground should never be wired together. This is wrong, and potentially dangerous. When you plug in something in the outlet, the neutral will be live, as it closes the circuit. If the ground is wired to the neutral, the ground of the applicance will also be live.

Can Reverse polarity cause a fire?

Watch out: Reversed polarity on an electrical outlet is dangerous. If you accidentally reverse these wires the device you plug in to the receptacle may “work” but it is unsafe and risks a short circuit, shock, or fire.

Which wire is hot when both are black?

The black wire is the “hot” wire, which carries the electricity from the breaker panel into the switch or light source. The white wire is the “neutral” wire, which takes any unused electricity and current and sends them back to the breaker panel.

Can reverse polarity damage electronics?

Reversed poles occur when you connect the negative cable with the positive and vice versa. This can damage the battery and other electrical components. Any battery-powered product you use while it’s plugged in will be energized through its full circuit and thus a potential source of electrical shock.

When can a white wire be hot?

White Wires With Black or Red Tape: Hot Typically, this is indicated with a band of black or red electrical tape (but other colors may be used) wrapped around the wire’s insulation. For instance, a white wire in a two-wire cable may be used for the second hot wire on a 240-volt appliance or outlet circuit.

Should there be voltage on the neutral wire?

You have to measure neutral-ground or hot-ground. If neutral-ground voltage is about 120 V and hot-ground is a few volts or less, then hot and neutral have been reversed. Under load conditions, there should be some neutral-ground voltage – 2 V or a little bit less is pretty typical.

What happens if you connect a hot wire to a neutral wire?

If the hot wire comes into contact with both the neutral and the ground, then it will flow through both wires back to the source but as the ground has less resistance more current will flow through it. … When you look at a receptacle and plug you’ll see there is a hot terminal, a neutral terminal and a ground terminal.

Does the common wire carry current?

You are correct in thinking that in a typical two wire AC loop/circuit, both wires carry the same amount of current (amps). So, both wires could be considered live wires. … To sum up, a live wire carries the full load current, while a neutral wire carries some current, only when the loads are not balanced.

What does hot and ground reverse mean?

Hot/ground reversal often means a missing neutral. Missing neutral would cause the receptacles (and lights) to not work but still activate a proximity voltage detector.

What happens if you wire plug wrong?

But here’s the catch: If you connect the circuit wires to the wrong terminals on an outlet, the outlet will still work but the polarity will be backward. When this happens, a lamp, for example, will have its bulb socket sleeve energized rather than the little tab inside the socket.

Should the white wire be hot?

Blue and yellow wires are sometimes used as hot wires and as travelers, green wires (and bare copper wires) are ground wires, and white and gray wires are neutral.

Why is my common wire hot?

If the neutral is disconnected anywhere between the light bulb and the panel, then the neutral from the light to the point of the break in the neutral will become hot (and the device will be unpowered, because no current will be flowing through it). … It might be best to temporarily unscrew any such bulbs.

What causes a ground wire to get hot?

Electrical theory is fine but in this case the cause is a high resistance somewhere in the ground side of the circuit. Corroded connections on the ends of the cable including where the cable connects to it’s end. Loose connection between cable and cable end. Corrosion inside the cable.

What happens when hot wire touches neutral?

Bare wires can inevitably touch the wrong places: Hot wire to neutral wire means a short circuit that causes sparks to fly; hot wire to grounding wire, or to grounded metal box means ground fault and possible shock.

Does common wire mean hot?

The “common” is the “neutral” or “ground” wire, depending on the type of circuit. In normal US residential wiring, you’ll have a black “hot” wire, a white “neutral” or “common” wire, and a green or bare “ground” wire.